Your browser (Internet Explorer 6) is out of date. It has known security flaws and may not display all features of this and other websites. Learn how to update your browser.
X

Crown XLS Series

Product Details

Minimum Guaranteed Power
per channel, both channels driven
XLS 202
XLS 402
XLS 602
XLS 802
XLS 5000
1 kHz with 0.5% THD
Stereo, 2 ohms (per ch.) 2,500W**
Stereo, 4 ohms (per ch.) 300W 450W 600W 800W 1,800W*
Stereo, 8 ohms (per ch.) 200W 300W 380W 500W 1,100W*
Bridge-Mono, 8 ohms 600W 900W 1,200W 1,600W 3,600W*
Bridge-Mono, 4 ohms –*750W for
100V
models
5,000W***with 0.1% THD
**with 1% THD
  • Reliable design incorporates many popular features
  • Housed in a rugged, all-steel 2U chassis (3U in the XLS 5000)
  • Efficient forced-air fans prevent excessive thermal buildup
  • Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
  • Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
  • Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

For product availability and pricing please contact your local dealer.

Specifications

Sensitivity (volts RMS) for full rated power at
4 ohms
1.25
Frequency Response (at 1 watt, 22 Hz – 20 kHz)
+0 dB, –1 dB
Signal to Noise Ratio below rated power (20 Hz to
20 kHz, inputs terminated)
A-weighted, below rated power
No weighting, below rated power
> 100 dB
> 95 dB
Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz
< 0.5%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB
< 0.3%
Damping Factor (8 ohm): 10 Hz to 400 Hz
> 200
Crosstalk (below rated power)
at 1 kHz
at 20 kHz
–75 dB
–50 dB
Input Impedance (nominal) (balanced,
unbalanced)
20 kilohms, 10 kilohms
Load impedance
Stereo
Bridge mono
4-8 ohms
8 ohms
AC Line Voltage and Frequency Configurations Available (± 10%)
120 VAC 60 Hz
100 VAC 50/60 Hz
220 VAC 50 Hz
230-240 VAC 50 Hz
Ventilation
Flow-through ventilation from front to back
Cooling
Internal heat sinks with forced-air cooling
Air Volume Requirements (per minute
per unit)
80.15 ft3 (2.27 m3)
Dimensions: Width, Height, Depth
XLS 202, 402, 602, 802: EIA Standard 19″W (EIA RS-310-B) x 3.5” (8.9 cm) H x15.2″ (38.6cm) D.
XLS 5000: EIA Standard 19″W (EIA RS-310-B), 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D.
Net Weight, Shipping Weight
XLS 202: 23.0 lb (10.4 kg), 28.0 lb (12.7 kg)
XLS 402: 25.7 lb (11.7 kg), 30.7 lb (13.9 kg)
XLS 602: 29.0 lb (13.2 kg), 34.0 lb (15.4 kg)
XLS 802: 35.5 lb (16.1 kg), 40.5 lb (18.4 kg)
XLS 5000: 62.0 lb (27.7 kg), 74.0 lb (33.6 kg)